The Original Utilikilt Belt    30″ – 64″ This is the Original Utilitkilt Belt. I first designed this belt back when I got my first Utilikilt at the Spring Escondido Renaissance Faire 2004. I soon discovered that my regular pants belt just did not cut it as a kilt belt. So, I started working on a design for the belt.

I lost count of how many different variations I made. 


Then at the Fall Escondido Renaissance Faire 2004, it happened. A customer came in to my booth wearing his New Utiltkilt that he just purchased and wanted a belt for it. I started working on the belt within a few minutes the belt started to come together. After some fine tuning I came up with this desgine.     


These belts will work on most Kilts. Each belt is made from 8 – 10 ounce California Latigo Leather for years of use. Please fallow these steps for your belt. 

Step 1. Select your belt Size (Put your Kilt on, take a tape measure or a heavy cord feed it through the loops like you would your belt. If you used the cord, measure the cord and add 2” to the total length. If you used a tape measure add 2” to the total.) Each belt has 2” of adjustment up & down. 


Step 2. Chose the color that you want, the choices are Black, Russet Brown, or Dark Brown.


Step 3. Chose the Buckle that you would like to have. There are four choices. 


Step 4. Chose the conchos. You have three chose on this one. Each belt has six conchos on it, you will only have pick one design.   

Original Kilt Belt 30" - 62"

Leather Color